ADJ FOCUS SPOT 7Z Скачать руководство пользователя страница 33

Страница: 33 / 40

R E M O T E D E V I C E M A N A G E M E N T ( R D M )

NOTE: In order for RDM to work properly, RDM enabled equipment must be used

throughout the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard

for lighting, allowing the DMX systems of the device to be managed, modified, and monitored

remotely (hence, remote device management). This protocol is ideal for fixtures installed in

locations that are not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled

controller to send out a signal to devices on the wire, as well as allowing the fixture to

respond (known as a GET command). The controller can then use it’s SET command to

modify settings that would typically have to be changed or viewed directly via the unit’s

display screen, including the DMX Address, DMX Channel Mode, and Temperature Sensors.
FIXTURE RDM INFORMATION:

RDM Accessible Parameters

[0x0011] Proxied Device Count

[0x0600] Pan Invert

[0x0200] Sensor Definition

[0x0601] Tilt Invert

[0x0201] Sensor Value

[0x0602] Pan Tilt Swap

[0x0080] Device Model Description

[0x0500] Display Invert

[0x0081] Manufacturer Label

[0x0501] Display Level

[0x0082] Device Label

[0x0603] Realtime Clock

[0x00E0] DMX Personality

[0x1010] Power State

[0x00E1] DMX Personality Description

[0x1031] Preset Playback

[0x0400] Device Hours

[0x0122] Default Slot Value

[0x0015] Comms Status

[0x00B0] Language

[0x0031] Status ID Description

[0x00A0] Language Capabilities

[0x0032] Clear Status ID

[0x00C2] Boot Software Version Label

[0x0401] Lamp Hours

[0x00C1] Boot Software Version ID

[0x0402] Lamp Strikes

[0x0070] Product Detail ID List

[0x0403] Lamp State

[0x0030] Status Messages

[0x0404] Lamp Mode

[0x1001] Reset Device

[0x0405] Device Power Cycles

[0x0016] Undefined PID [0x0016, (22)]

Please be aware that not all RDM devices support all RDM features, and therefore it is

important to check beforehand to ensure that the equipment that you are considering includes

all of the features that you require.

The following parameters are accessible in RDM on this device:

RDM Code

Device ID

Device Model ID

Personality ID

0X667

OPEN

1639

OPEN

Содержание FOCUS SPOT 7Z









































Результаты поиска

Содержание FOCUS SPOT 7Z

Отзывы:

Бренды по названию

Популярные бренды

ADJ FOCUS SPOT 7Z, Руководство пользователя

Результаты поиска

Содержание FOCUS SPOT 7Z

Отзывы:

Бренды по названию

Популярные бренды