manualshive.com logo in svg

ADJ FOCUS SPOT 7Z, Руководство пользователя

Поделиться
Скачать
ADJ FOCUS SPOT 7Z Скачать руководство пользователя страница 21

21

S Y S T E M   M E N U

DMX SETTINGS

 - The submenus listed under DMX SETTINGS are as follows: DMX Address, DMX 

Channel Mode, and No DMX Status.

 - DMX ADDRESS - In this submenu you can find and set your desired DMX address.
 - DMX CHANNEL MODE - In this submenu you can find and set your desired DMX channel mode.
 - NO DMX STATUS - This submenu setting is used as a precaution mode in case the DMX signal or 

power is lost or interrupted. The operating mode chosen in this submenu is the running mode the 
fixture will go into when the DMX signal is lost. Listed below are the 3 modes.
•  Hold Last - This setting will have the fixture stay in the last DMX setup.
•  Blackout - This setting will have the fixture automatically go into stand by/blackout mode.
•  Manual - This setting will go into the current manual control setup. See MANUAL CONTROL.
•  Internal Programs - This setting will go into the current Internal Program setup.

PERSONALITY

 - The submenus listed under PERSONALITY are as follows: Prim/Sec Mode, Select 

Signal, Aria Settings, Status Settings, Fan Settings, Zoom Speed, Dim Modes, LED Refresh 
Rate, Dim Curve, Reset Motors, Display, and Service.

PRIM/SEC MODE - In this submenu you are able to designate the units as either “Primary” or “Secondary” 
unit in a primary-secondary set up.

 - STATUS SETTINGS - In this submenu you are able to access and adjust/change: Pan Degree, Pan 

Invert, Tilt Invert, P./T. Feedback, P./T. Speed, and Hibernation.

 - FAN SETTINGS - In this submenu you are able to select your desired fan speed setting.
 - ZOOM SPEED - In this submenu you can select between Standard or Fast.
 - DIM MODES - In this submenu you are able to select your desired dimmer mode and adjust the 

dimming speed time. See the dimmer mode chart on page 26 for more information.

 - LED REFRESH RATE - In this submenu you are able to select your desired LED refresh rate.
 - DIM CURVE - In this submenu you are able to select your desired dimmer curve. See the dimmer 

curve chart on page 26 for more information.

 - RESET MOTORS - In this submenu you are able to reset selected motors.
 - DISPLAY - In this submenu you you are able to adjust the display intensity, invert the display, set 

the display lock time, and activate/deactivate the display lock.

 - SERVICE - In this submenu you are able to access and adjust/change: calibration (effect adjust), 

activate/deactivate the USB port power, update the software, and restore the factory settings.

MANUAL CONTROL

 - This menu is for manual testing and manual control.

INTERNAL PROGRAMS

 - In this menu you are able to select 1 of 7 internal programs to run. 

Program running speed and fade speed are adjustable.

Содержание FOCUS SPOT 7Z









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды