ADJ FOCUS SPOT 4Z, Руководство пользователя, Страница: 25 / 32

25
S Y S T E M M E N U
PRIMARY-SECONDARY
This function will allows you to link units to run in a Primary-Secondary set-up. In a Primary-Secondary
set up, one unit will act as the controlling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Primary or as a Secondary however, only one unit can be programmed
to act as the “Primary.”
Primary-Secondary Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR data cables
to link your units together. Remember that the Male XLR connector is the input and the Female XLR
connector is the ouput. The first unit in the chain (primary) will use the female XLR connector only.
The last unit in the chain will use the male XLR connector only.
2. Connect the first “Secondary” unit to the “Primary.”
3. Primary Unit:
• Press the MODE button to access the main menu. Press the UP or DOWN buttons so that
“Function” is highlighted, then press ENTER.
• Press the UP or DOWN buttons until “Disp.Set” is displayed, press ENTER.
• Press the UP or DOWN buttons until “Auto. Prog” is displayed, and press ENTER.
• Either “Primary” or “Alone” will be displayed. Use the UP or DOWN buttons to highlight “Primary”.
• Press the ENTER button to confirm your selection.
4. Secondary Unit(s):
• Press the MODE button to access the main menu. Press the UP or DOWN buttons so that
“Function” is highlighted, then press ENTER.
• Press the UP or DOWN buttons until “Disp.Set” is highlighted, then press ENTER.
• Press the UP or DOWN buttons until “Secondary Set” is highlighted, then press ENTER.
• Either “Secondary 1”, “Secondary 2”, or “Secondary 3” will be displayed. Use the UP/DOWN
buttons to find your desired secondary setting.
5. Press the ENTER button to confirm your selection.