ADJ FOCUS SPOT 4Z, Руководство пользователя

Страница: 24 / 32

24
S Y S T E M M E N U
ERROR INFO - This submenu will display any function errors that may occur. Please contact ADJ
customer support for additional information if any error warnings appear and there is any uncertainty
about what action needs to be taken.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to
“Information”, then press ENTER.
2. Use the UP/DOWN buttons to select “Error. Info”, then press ENTER.
3. Any errors that may have occurred will be displayed. Press the MODE button to exit.
MODEL INFORMATION - Use this function to display model name.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to
“Information”, then press ENTER.
2. Use the UP or DOWN buttons to select “Model.Info”, then press ENTER.
3. Model name will be displayed. Press the MODE button to exit.
SOFTWARE VERSION - Use this function to display current software version.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to
“Information”, then press ENTER.
2. Use the UP or DOWN buttons to select “Software.V”, then press ENTER.
3. The current software version will be displayed. Press the MODE button to exit.
RESET MOTOR - Use this function to display current software version.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to “Test”,
then press ENTER.
2. Use the UP or DOWN buttons to select “Reset.Motor”, then press ENTER.
3. Press the ENTER button to reset fixture motor, or press the MODE button to exit.
TEST CHANNEL - Use this function to test each of the channel functions.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to “Test”,
then press ENTER.
2. Use the UP or DOWN buttons to select “TestChannel”, then press ENTER.
3. Use the UP or DOWN buttons to scroll through channel functions.
4. Press the ENTER button to confirm your selection, or press the MODE button to exit.
PANEL CONTROL - Use this function to make fine adjustments.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to “Test”,
then press ENTER.
2. Use the UP or DOWN buttons to select “Panel. Ctrl”, then press ENTER.
3. Use the UP or DOWN buttons to scroll through various functions.
4. Press the ENTER button to confirm your selection, or press the MODE button to exit.
CALIBRATE - Use this function to calibrate/adjust the positions of the effect wheels. The Calibration
password is “050”. NOTE: ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION.
1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to “Test”,
then press ENTER.
2. Use the UP or DOWN buttons to select “Calibrate”, then press ENTER.
3. “XXXX” will be displayed. Use the UP/DOWN buttons set the “PIN” to “050” and press ENTER
4. Press the ENTER button to confirm your selection, or press the MODE button to exit.
PROGRAM
EDIT PROGRAM - The fixture comes equipped with a built-in DMX recorder that allows custom
programs to be installed and recalled directly from the fixture’s control board. Programs can be created
and stored using the fixture’s control board or by using an external DMX controller.
Select.Prog – This function allows the user to select one of nine of the user defined built-in programs.
This program is then accessed in “Function Mode” under “Program Run.”
Edit.Prog – This function allows the user to edit the built-in programs.
Edit.Scene – This function allows the user to edit or define the actual scenes that are stored in the user
defined built-in programs that are accessed in the previous step.