ADJ FOC598, Руководство пользователя

Страница: 22 / 36

ADJ Products, LLC - www.adj.com - Focus Spot One User Manual Page 22
Focus Spot One System Menu
Target Mode - Target mode is a restrictive pan/tilt control limiting the movement to a certain
degree. See Target Mode section for details.
Note: Added with software >V1.3
1. Press the MENU button until “Target Mode” is displayed, press ENTER. One of 5 target modes
will be displayed.
• Mode 1 - 100° - 240°
• Mode 2 - 190° - 330°
• Mode 3 - 280° - 420°
• Mode 4 - 370° - 510°
• Mode 0 - Random Mode
2. Press the UP or DOWN buttons to find your desired Target mode.
3. Press ENTER to confirm.
Sound Mode - In this mode the unit will run in sound active mode.
1. Press the MENU button until “Sound Mode” is displayed, press ENTER.
2. Either “On” or “Off” will now be displayed. Use the UP or DOWN buttons to toggle between “On”
and “Off”.
3. Press ENTER to confirm your selection.
Sound Sense - In this mode you can adjust the sound sensitivity of the sound active mode.
1. Press the MENU button until “Sound Sense” is displayed, press ENTER.
2. Press the UP or DOWN buttons to adjust the sensitivity level. The sensitivity level can be adjusted
between 0 (the lowest) and 100 (most sensitive).
3. Press ENTER to set you desired level.
DMX State - This setting defines the mode that the fixture will default to if DMX communica-
tion is lost. You can also set this as the operating mode you would like the unit to return to
when power is applied.
1. Press the MENU button until “DMX State” is displayed, press ENTER.
2. Either “Pri Sec”, “Blackout”, or “Last State” will be displayed. Choose an operating mode you
would like the unit to start up in when power is applied or the DMX signal is lost.
• Primary Secondary - If the DMX signal is lost or power is applied, the unit will automatically
go into Primary Secondary mode.
• Blackout - If the DMX signal is lost or power is applied, the unit will automatically go into
stand by mode.
• Last State - If the DMX signal is lost the fixture will stay in the last DMX set up. If power is
applied and this mode is set, the unit will automatically go into the last DMX set up.
3. Press ENTER to confirm your desired set up.