ADJ FOC598, Руководство пользователя

Страница: 21 / 36

ADJ Products, LLC - www.adj.com - Focus Spot One User Manual Page 21
Focus Spot One System Menu
System Menu: When making adjustments press ENTER to confirm your setup then press and
hold the MENU button for at least 3 seconds. To exit without making any adjustments press
the MENU button. The display will lock after 30 seconds, press the MENU button for 3 sec-
onds to unlock.
DMX Address - Set the DMX Address.
1. Press the MENU button until “DMX Address” is displayed, press ENTER.
2. “X” will now be displayed, “X” represents the displayed address. Press the UP or DOWN buttons
to find your desired address.
3. Press ENTER to confirm, and then press and hold the MENU button for at least three seconds to
assign.
Channel Mode - This will let you select your desired DMX Channel mode.
1. Press the MENU button until “Channel Mode” is displayed, press ENTER.
2. “X Chan” will now be displayed, “X” represents the displayed DMX channel mode. Press the UP
or DOWN buttons to find your desired Channel mode.
3. Press ENTER to confirm.
PRI/SEC Mode - This will let you set unit as a primary or secondary in a primary/secondary
configuration.
1. Press the MENU button until “PRI/SEC Mode” is displayed, press ENTER. Either “PRI”, “SEC 1”
or “SEC 2” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is displayed, then press ENTER to con-
firm.
NOTE: In a Primary/Secondary configuration you can make one fixture the Primary and then set the
next fixture to “SEC 2”, the fixtures will now have contrast movement to each other.
Show Mode - Show modes 0-4 (Factory programs). Show mode can run with or without sound
active mode active.
1. Press the MENU button until “Show Mode” is displayed, press ENTER.
2. “Show X” will now be displayed, “X” representing a number between 0-4. Shows 1-4 are factory
programs, while show “0” is random mode. Use the UP or DOWN buttons to find your desired
show.
3. When you have found your desired show press ENTER, then press and hold the MENU button for
at least 3 seconds to activate.