Flat Par TRI7XS Fuse Replacement
Channels 1, 2, and 3 will not work, when Channel 4 is being used.
When using Channel 6 values 128-239, Channel 5 will control the speed of the programs.
When using Channel 6 values 240-255, Channel 5 will control the sound sensitivity.
C
hannel
V
alue
F
unCtion
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 0 - 255 COLOR MACROS
(See 1 Channel DMX mode for colors)
5 STROBING/PROGRAM SPEED
0 - 15 NOTHING
16 - 255 STROBING/SPEED CONTROL
SLOW - FAST
6 PROGRAMS
0 - 127 OFF
128 - 135 COLOR DREAMING 1
136 - 143 COLOR DREAMING 2
144 - 151 COLOR DREAMING 3
152 - 159 COLOR DREAMING 4
160 - 167 COLOR DREAMING 5
168 - 175 COLOR DREAMING 6
176 - 183 COLOR DREAMING 7
184 - 191 COLOR DREAMING 8
192 - 199 COLOR CHANGE 1
200 - 207 COLOR CHANGE 2
208 - 215 COLOR CHANGE 3
216 - 223 COLOR CHANGE 4
224 - 231 COLOR CHANGE 5
232 - 239 COLOR CHANGE 6
240 - 247 SOUND ACTIVE MODE 1
248 - 255 SOUND ACTIVE MODE 2
7 MASTER DIMMER
0 - 255 0% - 100%
Flat Par TRI7XS 7 Channel Mode
ADJ Products, LLC - www.adj.com - Flat Par TRI7XS User Manual Page 16
ADJ Products, LLC - www.adj.com - Flat Par TRI7XS User Manual Page 17
Disconnect the unit from its power source. Remove the power cord
from the unit. Once the cord has been removed, you will find that the
fuse holder is located inside the power socket. Insert a flat-head screw
driver into the power socket and gently pry out the fuse holder. Remove
the bad fuse and replace with a new one. The fuse holder also has a
holder for a spare fuse.
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 24 fixtures maximum. After 24 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Flat Par TRI7XS Power Cord Daisy Chain
Flat Par TRI7XS Installation
The Flat Par TRI7XS is fully operational in three different mounting
positions, hanging upside-down from a ceiling, hanging sideways on
trussing, or set on a flat level surface. The unit should be mounted
using a mounting clamp (not provided), affixing it to the mounting
bracket that is provided with the unit. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. Always
ensure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times the unit’s weight. Also,
always use a safety cable that can hold 12 times the weight of the
unit when installing the fixture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people’s grasp.
Flat Par TRI7XS Photometric Chart
