ADJ ENC846 Скачать руководство пользователя страница 4

4

Unpacking: Thank you for purchasing the Encore FR50z by ADJ Products, LLC. Every Encore FR50z has 

been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping 

carton for damage that may have occurred during shipping. If the carton appears to have been damaged, 

carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit 

have arrived intact. In the event that damage has been found or parts are missing, please contact our toll 

free customer support number for further instructions. Do not return this unit to your dealer without first 

contacting customer support. 

Introduction: The ADJ Encore FR50z is a DMX intelligent, high powered LED fresnel fixture. This fixture 

can be used in a stand alone set up or connected in a Primary/Secondary set up. The Encore FR50z has 

two operating modes: dimmer control and DMX control. To optimize the performance of this product, 

please read these operating instructions carefully to familiarize yourself with the basic operations of this 

unit. These instructions contain important safety information regarding the use and maintenance of this 

unit. Please keep this manual with the unit for future reference. 

Customer Support: ADJ provides a customer support line, to provide set up help and to answer any ques-

tion that may arise during set up or initial operation. 

 

ADJ PRODUCTS LLC USA 

6122 S. Eastern Ave. Los Angeles, CA 90040

323-582-2650 | Fax 323-532-2941 | 

www.adj.com 

|

 [email protected]

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99 | 

www.americandj.eu

 | 

[email protected]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070 | 

[email protected]

CUSTOMER SUPPORT

Contact ADJ Service for any product related service and support needs.

Please visit 

forums.adj.com

 with questions, comments, or suggestions.

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

800-322-6337 | Fax 323-832-2941 | 

[email protected]

ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET 

+31 45 546 85 60 | Fax +31 45 546 85 96 | 

[email protected]

REPLACEMENT PARTS please visit 

parts.adj.com

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. 

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, as doing so 

will void your manufacturer’s warranty. In the unlikely event that your unit requires service, please contact ADJ 

Products, LLC.

PLEASE recycle the shipping carton when ever possible.

INTRODUCTION

Содержание ENC846

























Отзывы: