15
ADD A CHASE STEP
1. Press and hold the Program button for approximately 2 seconds or until the PROG indicator in
the LED display flashes. Once the indicator is flashing, the Program button can be released.
2. Select the Chase # button (1-12) that you wish to add a step to. The relevant Chase LED should
illuminate.
3. Press the Tap/Disp button. The Step indicator light should illuminate in the LED display.
4. Press the Bank UP/DOWN buttons to manually step through the chase steps. Find the chase
step that you wish to add a step after.
5. Press the Midi/Rec button. This adds a new step with a new number. All other steps will be reas-
signed a new number.
6. Press the Tap/Disp button disengage Step mode. The Step indicator in the LED display should be
OFF.
7. Using the BANK UP & DOWN buttons, select the scene bank (1-30) that contains the scene you
want to add. You can view the scene banks in the LED display by referring to the furthest two
digits to the right.
8. Press the Midi/Rec button to record the step into your chase. All LEDs should flash three times to
confirm that the chase step was added.
9. Repeat steps 3 through 7 to add additional chase steps.
10. Press and hold down the Program button for approximately 2 seconds to exit. A flashing
Blackout indicator in the LED-display indicated that the device is no longer in program mode.
DELETING CHASE STEPS
1. Press and hold the Program button for approximately 2 seconds or until the PROG indicator in
the LED display flashes. Once the indicator is flashing, rthe Program button can be released.
2. Select the Chase # button (1-12) that you want to delete a step in. The relevant chase LED should
illuminate.
3. Press the Tap/Disp button. The Step indicator light should illuminate in the LED display.
4. Press the Bank UP/DOWN buttons to manually step through the chase steps. Find the chase
step that you want to delete.
5. Press the Auto/Del button to delete the chase step. All LEDs should flash three times to confirm
that the chase step was deleted.
6. Repeat steps 4 & 5 to delete additional chase steps.
7. Press and hold the Program button for approximately 2 seconds or until the PROG indicator in
the LED display stops flashing. A flashing Blackout indicator in the LED display indicates that the
device is no longer in program mode.
DELETE A CHASE
1. Press and hold the Program button for approximately 2 seconds or until the PROG indicator in
the LED display flashes. Once the indicator is flashing, record mode is engaged and the Program
button can be released.
2. Select the Chase # button (1-12) that you want to delete.
3. Simultaneously, press the Auto/Del button and the same Chase # button that you selected in step
2. All LED’s should flash three times to confirm that the chase was deleted.
4. Repeat steps 2 & 3 to delete additional scenes.
5. Press and hold the Program button for approximately 2 seconds or until the PROG indicator in
the LED display stops flashing. A flashing Blackout indicator in the LED display indicates that the
device is no longer in program mode.
CHASE OPERATION
