A.D.J. Supply Europe B.V.
– www.americandj.eu – CRAZY POCKET 8 User Instructions Page 10
SYSTEM MENU (continued)
2. Press ENTER and the bottom choice will begin to flash. Use the UP or DOWN buttons to choose an
operating mode you would like the unit to start up in when power is applied or the DMX signal is lost.
•
LAST
- If the DMX signal is lost the fixture will stay in the last DMX setting. If power is applied and this mode
is set, the unit will automatically go into the last DMX set up.
•
MASL
(Master Slave) - If the DMX signal is lost or power is applied, the unit will automatically go into Master
Slave mode and run a built-in show.
•
BLND
(Blackout) - If the DMX signal is lost or interrupted, the unit will automatically go into stand by mode.
3. Press ENTER to confirm your desired set up.
PAN
- Pan Inversion
1. Press the MENU button until “
PAN
” is displayed, press ENTER. Either “
Yes
” or “
No
” will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons until
“
Yes
” is displayed, press ENTER to
confirm. To deactivate Pan inversion,
select “
No
” and press Enter.
TIL 1
- Tilt Inversion for Bar 1 (Top Bar)
1. Press the MENU button until “
TIL 1
” is displayed, press ENTER. Either “
Yes
” or “
No
” will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons
until “
Yes
” is displayed, press ENTER to
confirm. To deactivate
tilt inversion, select “
No
” and press Enter.
TIL 2
- Tilt Inversion for Bar 2 (Bottom Bar)
1. Press the MENU button until “
TIL 1
” is displayed, press ENTER. Either “
Yes
” or “
No
” will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons
until “
Yes
” is displayed, press ENTER to
confirm. To deactivate
tilt inversion, select “
No
” and press Enter.
LED
- With this function you can have the LED display turn off after 10 seconds.
1. Press the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or DOWN buttons to select “
ON
” to keep the LED
display on at all
times, or “
OFF
” to switch to have the LED display switch off after 10 seconds.
DISP
- This function will reverse the display 180º.
1. Press the MENU button until “
DISP
” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it again. Press ENTER when you have made your
desired setup.
TEST
- This function will run a self test program.
1. Press the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running time of the unit.
1. Press the MENU button until “
FHRS
” is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU to exit.
VER
- Use this function to display the Software version of the unit.
1. Press the either the MENU button until “
VER
” is displayed, press ENTER.
2. The display will show the software version.
RSET
- This function will reset the unit.
1. Press the MENU button until “
RSET
” is displayed. Press the ENTER button and the unit will reset itself.
