ADJ Products, LLC - www.adj.com - Allegro Z6 User Manual Page 7
Allegro Z6
Installation
The Allegro Z6 is fully operational in three different mounting positions, hanging upside-down from a
ceiling or trussing, sideways on trussing, or set on a flat level surface. Be sure this fixture is kept at
least 12m (40ft) away from any flammable materials (decoration etc.). Always use and install the sup-
plied safety cable as a safety measure to prevent accidental damage and/or injury in the event the
clamp fails (see next page). Never use the carrying handles for secondary attachment.
When installing the unit, the trussing or area of installation must be able to hold 10 times the weight
without any deformation. When installing the unit must be secured with a secondary safety attachment,
e.g. and appropriate safety cable. Never stand directly below the unit when mounting, removing, or
servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits, installation
material being used, and perodic safety inspection of all installation material and unit. If you lack
these qualifications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.
OFFLINE
SETTING
OF
FL
IN
E
SE
TT
IN
G
O
F
F
LIN
E
S
E
T
T
IN
G
