ADJ 1227000010 Скачать руководство пользователя | Manualshive

Страница: 20 / 32

background image

ADJ Products, LLC - www.adj.com - Focus Spot 2X User Manual Page 19

Focus Spot 2X

System Menu

DMX ADDRESS - In this submenu you can find and set your desired DMX address.
DMX CHANNEL MODE - In this submenu you can find and set your desired DMX channel mode.
S

ECONDARY

MODE - In this submenu you are able to designate the unit(s) as either a “

primary” or

“secondary” in a primary-secondary setup.

SHOW MODE - In this submenu you can select 1 of 5 (0-4) built-in shows to run.
TARGET MODE - In this submenu you are able to select 1 or 5 (0-4) target modes for the unit to

follow. Target mode is a restrictive pan/tilt control mode limiting the pan/tilt movements to a certain

degree. See page 24 for a diagram of the Target mode movements.
SOUND MODE - In this submenu you can activate and deactivate sound active mode.
SOUND SENSE - In this submenu you can adjust and set the sound sensitivity level for sound active

mode.
DMX STATE - This submenu setting is used as a precaution mode in case the DMX signal is

lost or interrupted. The operating mode chosen in this submenu is the running mode the fixture

will go into when the DMX signal is lost. Listed below are the 3 modes.

•

Pri/Sec Mode

-

This setting will have the fixture automatically go into primary/secondary

setup. The unit will go into the setting that is selected under “SECONDARY MODE”.

• Blackout - This setting will have the fixture automatically go into stand by mode (blackout).
• Last State - This setting will have the fixture stay in the last DMX setup.

DIMMER CURVE - In this submenu you are able to select 1 or 5 dimmer curves. See page 25 for the

dimmer curve chart for more information.
PAN INVERT - In this submenu you can activate pan inversion.
TILT INVERT - In this submenu you can activate tilt inversion.
BACK LIGHT - In this submenu you can have the display backlight turn off after a minute of no acitivty.
AUTO TEST - In this submenu you can run an auto test of the functions.
LED TEMP. (TEMPERATURE) - In this submenu you can check the current running temperature.
FIXTURE TIME - In this submenu you can check the fixture running time.
FIRMWARE VERSION - In this submenu you can check the current software version.
FACTORY RESTORE - In this submenu you restore the factory (default) settings.
RESET - In this submenu you can reset the motors.

«
...
18
19
20
21
22
...
»

Содержание 1227000010

































Отзывы:

Нет отзывов

Похожие инструкции для 1227000010

medialon Showmaster Go

Бренд: 7th Sense Страницы: 9

Бренд: Daga Страницы: 24

Бренд: DAF Страницы: 68

Бренд: Laserworld Страницы: 8

Бренд: Laserworld Страницы: 6

Бренд: LaserLiner Страницы: 56

Бренд: LaserLiner Страницы: 54

Бренд: Mangar International Страницы: 8

Бренд: Malvern Instruments Страницы: 30

Бренд: zarges Страницы: 36

Бренд: AMP Lighting Страницы: 5

Бренд: Strapack Страницы: 16

Бренд: Hameg Страницы: 60

Aqua Timer 3000

Бренд: Melnor Страницы: 6

Бренд: Bodyworx Страницы: 17

Бренд: Wood-mizer Страницы: 59

Бренд: Tandem Страницы: 7

Бренд: Thoratec Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды