Adisa NEO FIRE 120, Техническое руководство по установке, использованию и обслуживанию

Страница: 44 / 77

NEO FIRE – Technical Manual
44
16 INSTALLATION
16.1 Boilers heat output
The boilers total power output to be installed must be the proper one to respond to the demands of the
installation. In order to generate heating with the maximum efficiency at every moment, it is important to
consider the number of the boilers to be installed, so that the total power should be appropriate for the
different demands of the installation in the different periods of the year.
16.2 Boilers room
The boilers room must be clean, well vented and lightened, and must comply with the current regulations for
gas equipments. It is important to avoid environments with excess of humidity, dust and aggressive steams. If
the boilers room needs to have some building works, the boilers should be switched off and protected in order
to avoid dust.
For an easier maintenance it is important to respect the minimum distances indicated by the regulations and
the manufacturer’s instructions, both for one boiler and for several boilers. Every part of the boiler must be
easily accessible.
NEO FIRE 80 to NEO FIRE 280 NEO FIRE 360 to NEO FIRE 900
≥0,5 m
≥1
m
≥0
,5
m
≥0
,5
m
≥
1
m
≥1
m
≥1
m
≥0
,9
m
≥
0
,9
m
≥0,5 m
≥0,5 m
≥0,5 m
≥0,5 m
≥0,5 m
Boiler draining:
NEO FIRE 80 to NEO FIRE 280 are provided with a
drain hose (16).
For NEO FIRE 360 to NEO FIRE 900 one can be
installed in the manifold.
In order to drain water from the boiler, turn off
the boiler, close the cut-off valves and open the
boiler draining.