32
Adirondack Spas
®
OWNER'S MANUAL
opErATing ThE hYdro puMpS on lE ModElS
Jets 1 button
Activates the hydro jet pump #1 for maximum hydrotherapy jet action . Press the Jets 1
button once for low speed, again for high speed and again to turn the pump off . When the
pump is activated the indicator above the Jets 1 button will light up . The pump will turn off
automatically after 15 minutes on high speed and 4 hours on low speed .
Jets 2 button
Activates the hydro jet pump #2 for maximum hydrotherapy jet action . Press the Jets 2 button
once for high speed and again to turn the pump off . When the pump is activated the indicator
above the Jets 2 button will light up . The pump will turn off automatically after 15 minutes on
high speed .
note:
The spa light will begin flashing 15 seconds before the pumps shut off as a reminder,
that the pump(s) cycle is about to end.
note:
The Keene, Champlain and Caroga models have only one jet pump button on the
panel .
note:
Adirondack Spas® are designed for maximum heat retention . The unit is not designed
to cool water . If the set or desired temperature is below that of the ambient temperature, the
unit will not be able to achieve this demand . Depending on the desired temperature, it may be
necessary to add cool water to the unit to lower your spas water temperature .
light button
The spa light is controlled using the LIGHT button . Press the LIGHT button once to turn the
spa light on, then again to turn the light off . The LIGHT button is also used in conjunction
with temperature(s) to navigate the system menus.
optional lEd blast™ or Splash™ lighting
If your spa is equipped with one or more of these lighting systems, see the operational features
and directions located in the Blast™ or Splash™ box, or contact your dealer for instructions .
