Parts
Coffee filter
This coffeemaker comes with a reusable mesh filter. A paper filter can’t be used in place of reusable
mesh filter.
Before first use
1.
Clean the mug, mug lid, reusable mesh filter and the filter basket in warm soapy water and rinse
thoroughly.
2.
Brew two mugs of water according to the brewing coffee section but without coffee grounds.
Brewing coffee
1.
Lift the water reservoir lid and fill the water reservoir with 14oz of water (about one full mug).
2.
Put three tablespoons of finely ground coffee or four tablespoons of regular ground coffee into
the reusable mesh filter for a full mug of coffee.
Note
: Regular coffee grounds require more coffee per cup to achieve the strength of finer coffee
grounds.
3.
Gently shake the mesh filter to distribute the coffee evenly.
4.
Place the mesh filter into the filter basket and place the filter basket into the brewing chamber.
5.
Close the water reservoir lid.
6.
Remove the lid from the mug, tilt the mug slightly and place it on the base.
7.
Plug the power cord into a standard 120-volt AC electrical outlet.
8.
Press the start button - the indicator light will illuminate, indicating that the coffeemaker is
operating.
Caution
: Don’t open the reservoir lid during the brew cycle as scalding may occur.
