ADInstruments Bio Amp, Руководство пользователя

Страница: 14 / 50

Bio Amp Owner’s Guide
14
cable and leads with which your Bio Amp is supplied (Tronomed D-1340 or
Tronomed D-1540). The single Bio Amp and Dual Bio Amp have different
pin arrangements, so their Bio Amp cables are not interchangeable. The
socket and connections to it are discussed in more detail later on.
Connections are made to the Octal Bio Amp using individual lead wires
(supplied with every unit) and a common ground, rather than using a single
multi-pin socket. Each of the eight Bio Amp inputs has one red and one black
connector and an indicator light. The green connector is a shared ground
connection across all eight inputs.
The Status Indicator
The status indicator light of a single Bio Amp is located at the bottom right of
the front panel. The status indicator lights of a Dual Bio Amp are located
beneath the input connector on the front panel. The status indicator lights of
an Octal Bio Amp are located beneath the pair of red and black connectors of
each input on the front panel.
When an ADInstruments application such as LabChart starts, the status
indicators should flash briefly and then remain green, indicating that the
program has found the front-end, checked and selected it, and is ready to use
Input socket
Status indicator
Figure 1–1
The front panels of the Bio
Amp, Dual Bio Amp and
Octal Bio Amp