AD Instruments
________________________________________________________________________
©Copyright Abacanto Digital SA.
Manual de usuario AD8108
27
In which, the figure (e.g. 12) after the pair is the pair line number and it is the
length after the line number.
At the moment, push A==== key to restart test or push PAIR&L key to return
the main menu.
Test Result 3: Abnormal pair and length (PAIR & LENGTH) display
It will display the paired lines first if there is unpaired lines in the pair and length
(PAIR & LENGTH) measurement:
In which, the last line (78) indicates there is no pair is found in lines 7 and 8, at
the moment, it will display the length of unpaired line number (as shown below):
if you push the
key: ( Or push PAIR&L key to return the main menu)
It will display "X" to indicate an open circuit if the length is less than 90%
of other line pair length and the open circuit is located at around 89.7
M from the tester. (The open circuit line number could be rechecked by
WIREMAP function.)
At the moment, push =A key to go back previous picture and éìëÜ
âÉó=íç=ëÜçï=ÑìêíÜÉê=ìåé~áêÉÇ=äáåÉ=åìãÄÉê=äÉåÖíÜK=Elê=éìëÜ=m^foCi
âÉó=íç=êÉíìêå=íÜÉ=ã~áå=ãÉåìF
