AD Instruments
_______________________________________________________________________________
©Copyright Abacanto Digital SA.
Manual de usuario AD210
9
Warning:
when users see “Overheated” warning shown in
LCD:
1. Users must wait durin
g this “Overheated: cooling” period before they start next simulation.
2. And if users would like to turn the unit off, they must wait for another 3 min. (at least) for
the cooling fan to cool off the internal components.
Warning:
When using batteries as the power source,
please do not plug in an AC adaptor. Or the power source
will be stopped and the data will disappear.
Note:
When pressing any button, users will hear a sound of
buzzer. When keeping pressing it for more than 2
seconds, users will hear another sound of buzzer.
Selected Condition of Auto Scan, Manual Scan, or Test
A-1
Users should first select
AUTO SCAN (
)
to obtain a general idea of characteristics
of a solar panel.
Press
button to turn on the Analyzer. Properly connect the pair of Kelvin clips to the
solar panel and the Analyzer. The red Kelvin clip is for positive pole and the black Kelvin
clip for negative pole.
Press
button to start
AUTO SCAN
. After the scanning is finished, the result will come
out like below.
Operation
