AD Instruments
24
AD160 HD Integrated Receiver Decoder User Manual
§
Gateway: Gateway setting for connecting to the server.
§
Mac Address: Query the receiver‟s Mac Address.
·
Factory setting
Get all the parameters in the equipment back the default parameters.
Ø
Advance
This option is designed for recording the information about the equipment, however, the
option is not available now and reserved for the future.
Troubleshooting
Problem
Possible causes
What to do
The display on the
front panel does not
light up.
No power.
Check that the main cable is
plugged into the power socket.
The front panel red
light is on. AV has no
output.
The unit is in standby
mode or no output
connection.
Check the output connection or
Press the standby button.
TV is not in AV mode. Set TV in AV mode.
No or bad signal.
No cable connection or
the program does not
exist in the current
satellite.
Check the cable connections, LNB
and other equipment connected
between the LNB and the STB, and
/or adjust the dish.
The satellite dish is not
facing the satellite.
Adjust the dish. Check the signal
level in the antenna setup menu.
Bad picture / Blocking
error.
The satellite dish is not
facing the satellite.
Adjust the dish.
Signal is too strong.
Connect a signal attenuator to the
LNB input.
Signal is too weak.
Change to a larger dish.
LNB noise figure is too
high.
Change to a LNB with a lower
noise figure.
The LNB is defect.
Change the LNB.
Problem
Possible causes
What to do
Signal is good. But
No picture and no
audio.
The picture and audio are
scrambled.
Change to a FTA channel.
There is interference
on your digital
satellite channel.
The system is connected with RF
leads and the output channel of the
receiver interferes with an existing
terrestrial channel or video signal.
Change the receiver
output channel to a more
suitable channel.
Network remote can
not connect
IP stetting
Check the PC IP and
equipment IP
