AD Instruments
22
AD160 HD Integrated Receiver Decoder User Manual
·
IP Receiver
§
Enable: When the programs are from IP source, select on.
§
Protocol: Optional UDP and RTP according to your IP source.
§
Enablechannel: When the programs are from IP source, select on.
§
MulticastAddress: Set up the multicast IP address for receiving the IP signal.
§
MulticastPort: Set up the UDP port for receiving the IP signal.
Other parameters: Default setting.
·
Transmitter
§
ChannelSelect: Set up the IP channel number where you want to transmit
programs.
§
EnableChannel: Enable or disable the IP channel.
§
Protocol: Optional UDP or RTP according your requirement.
§
EncapNum TSPackts: Configuration range is 1
—
7. (Number 7 is
recommended).
§
TypeOfService: It includes Normal, Min delay, Monetary cost, Max reliability,
Max Throughput,.
§
TimeToLive: Configuration range is 1-255. (Number 8 is recommended).
§
IPDestAddress: Set up the IP channel‟s multicast IP address for broadcasting
the IP signal.
§
UDPDestPort: Set up the UDP port for the IP signal.
Other parameters: Default setting.
Note:
