23
AAB-X22/X2
430-2410-021-EN-11
COMMISSIONING
6
Commissioning
►
Before switching on the voltage, check that all cables are properly mounted and wired
and that all bushings are closed.
DANGER!
Risk of explosion in hazardous areas due to electrical voltage.
The electronics of the ADICOS AAB-X22/X2 requires an electrical voltage that
can trigger an explosion in potentially explosive atmospheres.
•
De-energize the entire detector system and secure against unintentionally
reactivation for all wiring work!
•
In the case of wiring within potentially explosive atmospheres, only use ex
-
plosion-proof junction boxes with respective approval!
•
Do not bend connection cable! Observe minimum bending radius!
WARNING!
Equipment damage!
ADICOS systems work with electrical current, which can cause equipment dam-
age if not installed properly.
•
Before switching on the system, verify that all components are properly
mounted and wired.
•
Commissioning may be performed only by properly trained personnel.
Tips and recommendations
The ADICOS AAB-X22/X2 is a passive component. Separate commissioning is
not required.
►
ADICOS system commissioning is to be performed according to the instructions of the
M-Bus interface (M-Busmaster) used.
Содержание AAB-X2
Страница 28: ......
