manualshive.com logo in svg

ADIC FCR 200, Руководство оператора

Поделиться
Скачать
ADIC FCR 200 Скачать руководство пользователя страница 87

Perform Configuration

6-15

 

 

SCSI-to-Fibre Channel Mapping 
Configuration

This option allows modification of the table mapping SCSI 
Target:LUN values to Fibre Channel Node:LUN values.

Configuration of these devices is similar to that for indexed 
addressing, without the user assists. Prior to configuring these 
tables, the user must enable the SCSI target and initiator 
addresses desired to enable the mapping for that SCSI device.

Trace Settings Configuration

This option allows trace levels to be set. This should not be 
modified in normal operation, as performance degradation 
may result. 

Further information on using this interface can be later in this 
chapter.

Save Configuration

This option saves the current configuration state in FLASH, 
and updates the saved previous configuration state.

Restore Last Saved Configuration

This option restores the most recent previously saved 
configuration. This can be useful when configuration changes 
are made, but the user wishes to return to the previously 
configured state.

Trace Setting

Version: X.X.XXXX

Level 0 : On

Level 1 : On

Level 2 : Off

Level 3 : Off

Level 4 : Off

Level 5 : Off

Level 6 : Off

Level 7 : Off

U) Update Current Operating Trace Levels

X) Return to previous menu

Содержание FCR 200













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды