manualshive.com logo in svg

ADIC FCR 200, Руководство оператора

Поделиться
Скачать
ADIC FCR 200 Скачать руководство пользователя страница 55

SCSI Connection

4-15

 

 

SCSI Connection

The FCR200 supports Fast/Ultra Wide SCSI. The FCR200 is 
factory configured to support either a Single-Ended or 
Differential SCSI bus. Four 68-pin D-shell connectors are 
located on the rear panel of the unit, allowing the unit to be 
attached in the middle or at the end of a SCSI bus. If the 
FCR200 is located at one end of the SCSI bus, an external 
terminator should be installed. Two terminators are provided 
with the FCR200. 

The FCR200 supplies termination power (TERMPWR) on each 
SCSI bus. A self-resetting fuse is used that will reset after the 
fault is cleared.

To connect the FCR200 to a SCSI bus:

1

Power off your SCSI devices.

2

Connect a SCSI cable to one of the SCSI connectors 
on the back of the router. If necessary, use a narrow-
to-wide adapter.

3

Connect the other end of the SCSI cable to the next 
SCSI device on the bus.

4

If the FCR200 is at the end of the SCSI bus, place the 
terminator provided with the router on the 
FCR200’s other SCSI connector on the same bus. If 
the router is not at the end of the bus, attach a 
second SCSI cable to the other SCSI connector. Use 
a narrow-to-wide adapter, if necessary. Connect 
this cable to the next device on the bus.

Single-Ended SCSI support is indicated by 
this symbol on the rear of the FCR200.

Differential SCSI support is indicated by 
this symbol on the rear of the FCR200.

Содержание FCR 200













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды