ADI IOG-100, Руководство пользователя, Страница: 32 / 56

29
General Settings
→
Line settings (VoIP Only)
Ring (Early Media) Time Limit: Enter the timeout to cancel a call if no one answers the phone.
A Tone Force Dial Time
：
Waiting time for A Tone after dialing, the number will be dialed forcibly
after set up time
Enable End of Digit Tone: Check the box to activate the function of playing a “Beep-Beep” tone
to notify the user that the call is in progress.
Loop Current Drop Trigger Time: Enter the time to avoid the line being engaged when FXS port
is connected to PBX. It stops the loop current from FXS port when FXS port is playing busy tone.
The setting “0” zero is to disable this function.
Loop Current Drop Duration: Enter the drop duration for loop current.
ROH Begin Time: As users forget hang up phone set it makes FXS play loud Howler Tone to
notify users put hand set correctly. If this timer is set to be 20 seconds, that FXS play busy tone
for 20 seconds then play ROH.
ROH Duration: The remind audio will be displayed for 60 seconds to remind the user to hang up.
It will stop displaying automatically when the time is up.
FXS Ring Voltage: It is to set the Ring Voltage of FXS.
FXS Onhook Voltage: It is to set the Onhook Voltage of FXS.
Attention: After disabling this function, FXO cannot recognize available lines. The Internet
incoming calls may not be available through FXO. It is suggested to disable the unconnected
lines to avoid this situation.
VoIP Centrex Extension Digit Count: This feature is to enable and set the digit count of VoIP
Centrex. The setting “0” zero is to disable this function.
VoIP Centrex Digit: Enter the digit for VoIP call. If you dial VoIP Centrex Digit first, the dialing