ADI IOG-100 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 56

ADI IOG-100 Скачать руководство пользователя страница 24

21

General Settings

→

RoIP

Proxy Server IP/Domain, Port: Enter the IP address or URL (Uniform Resource Locator) and
Listen Port of SIP proxy server.

Proxy Server Realm: Most of the VSP aren’t required to be set up, please consult with VSP if the
call cannot be made.

TTL (Registration interval) [10-7200 s]: The interval for RoIP re-report to SoftSwitch.

SIP Domain, Use Domain to Register: Area Network specified by VSP (Some VSP doesn’t require
extra settings. If the connection cannot be done by applying SIP Domain, then IP will be applied
instead. Please contact the System Provider if the calls cannot be made.

Bind Proxy Interval for NAT: Check the box to keep the binding exist by sending packets when
the RoIP is behind a NAT and SIP proxy server is not able to keep the binding.

Initial Unregister: Check the box to send an unregistered message initially by the RoIP and then
it will perform a general register process.

Unregister All Contacts: RoIP sends requests to un-register

Keep SIP Auth: RoIP keeps the last register SIP MD5 authentication information and re-use it for
next register request.

Support Message Waiting Indication (MWI): It is used to enable/disable Message Waiting
Indication. It is available only when Voice Mail Service is available from the VoIP Service Provider.
(VoIP Only)
MWI Subscribe Interval: It is used to set the subscribe time for the RoIP to check the voice mail.

«
...
22
23
24
25
26
...
»

Содержание IOG-100

























































Отзывы:

Нет отзывов