ADI AQ-16, Руководство пользователя

Страница: 22 / 33

Standard DCS Codes Table
017 054 132 212 263 346 445 523 654
023 065 134 223 265 351 446 526 662
025 071 143 225 266 356 452 532 664
026 072 145 226 271 364 454 546 703
031 073 152 243 274 365 455 565 712
032 074 155 244 306 371 462 606 723
036 114 156 245 311 411 464 612 731
043 115 162 146 315 412 465 624 732
047 116 165 251 325 413 466 627 734
050 122 172 252 331 423 503 631 743
051 125 174 255 332 431 506 632 754
053 131 205 261 343 432 516 645
MEMORY CHANNEL
In memory channels, you can store frequency and related data
which you often use. Then you don’t need re-program these data
each time. Just by simple operation to recall the channels you
needed. There are 128 memory channels for selection.
Storing Data in Memory Channels
1.In VFO mode, select the desired frequency and related data.
2.Press [ F ] key, “ F ” will blink on LCD.
● A memory channel number appears.
● If there are not any operation in 10 seconds blink, the transceiver will
return to current working mode.
3.Use [ UP ]/[ DOWN ] key to select the memory channel number to
save.
4.Press [ V/M ] key to complete and return to VFO working mode.
●
The selected frequency and related data are stored in the memory
channel.
● If the channel selected in the previous step already contained data, the
new data will overwrite the old one.
Recalling Memory Channels
1.Press [ V/M ] key again to enter MR mode.
● The memory channel used last will be recalled.
2.Use [ UP ]/[ DOWN ] key to select the desired memory channel.
●
You can not recall empty memory channel.
●
To return VFO mode, press [ V/M ] key again.
Naming Memory Channels
You can name memory channels using up to 6 alphanumeric
characters. When you recall a named memory channel, its name