Connection
❶
Connect the air input hose to a plant air source. Set mains air supply within 80 to 100 psi (5.5 to 6.9
bar). Where required, use an ADL five-micron filter regulator #TSD800-6.
❷
Push the air input hose in to the dispenser. Standard 6mm OD hose push fit.
❸
Push in the foot pedal connector, tighten the threaded collar.
❹
Refer to
“Making Timed Deposits of Watery-thin Fluids”
on page 10 if applicable.
❺
Attach the 10cc barrel (#910-N) to the 10cc adapter head (#71003RHB).
❻
Take the 10cc barrel adapter assembly (#71003RHB on the adapter head) and insert the yellow,
male quick-connect into the air output fitting on the front panel and turn clockwise to lock. Place the
barrel in the barrel stand.
❼
During this initial testing, you will not use the vacuum control. Keep this control shut off (turned
completely clockwise—do not force).
Sales and service www.adhesive-dispensing.co.uk [email protected]
