Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN Gateway / MQTT
Document code: MN67F36_ENG Revision 1.000 Page 17 of 35
Figure 3b: “Set Communication
IO-Link” window
Figure 3c: “Set Communication
Ethernet
connection” window
S
ELECT
D
EVICE
:
This section is used to define the type of Ethernet connection used. It is possible to
select:
Only Ethernet Cable
Ethernet cable + Wi-Fi
E
THERNET
C
ONNECTION
:
The means of the fields for “Ethernet Connection” are:
In the field “
Device Name (Hostname)
” the Hostname to assign to the
converter is defined;
If the field “
Obtain an IP Address Automatically (DHCP for Cable
Connection)
” is checked, DHCP for LAN connection is enabled;
If the field “
Obtain an IP Address Automatically (DHCP for Wi-Fi
Connection)
” is checked, DHCP for Wi-Fi connection is enabled;
If the field “
Enable DNS
” is checked, DNS protocol is enabled;
In the field “
Primary DNS
” the IP Address of the primary DNS server is
defined;
In the field “
Secondary DNS
” the IP Address of the secondary DNS server
is defined.