Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN Gateway / MQTT
Document code: MN67F36_ENG Revision 1.000 Page 18 of 35
L
O
R
A
WAN:
This section is used to define the general parameters of LoRaWAN. The means of
the fields are:
In the field “
RF Band
” the wireless band used for LoRaWAN communication
is defined;
In the field “
Network Type
” the type of LoRaWAN network is defined;
In the field “
Diagnostic Position
” it is possible to define an offset into the
internal memory array where the status of the LoRaWAN end devices
configured is saved. The diagnostic is made bit to bit, so each bit will
represent a status of a single end device:
o
1
End device connected;
o
0
End device not connected.
The bits’ order will be the same of the end devices’ definition inside the LoRaWAN Access section;
In the field “
RX2 Datarate
” the data rate on RX2 window is defined.
Figure 3d: “Set Communication
LoRaWAN” window
