ADF Web HD67F18-B2 Series, Руководство пользователя

Страница: 23 / 33

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual SNMP Agent / LoRaWAN Gateway
Document code: MN67F41_ENG Revision 1.000 Page 23 of 33
In the “ LoRaWAN Gateway Devices List ”, the list of LoraWAN end devices to connect is defined. The means of the fields for configuration
are:
If the field “ Enable ” is checked, the LoRaWAN end device is enabled;
In the field “ Device EUI ” the Device EUI for the LoRaWAN device is defined;
In the field “ Join EUI ” the Join EUI for the LoRaWAN device is defined;
In the field “ Device Name ” the name of the LoRaWAN device is defined;
In the field “ Activation Method ” the activation method for LoRaWAN device is defined;
In the field “ Network Session Key ” the Network session key for LoRaWAN connection is defined;
In the field “ Application Session Key ” the Application session key for LoRaWAN connection is defined;
In the field “ Application Key ” the Application key for LoRaWAN connection is defined;
In the field “ Device Address ” the address of the LoRaWAN device is defined;
In the field “ Class ” the Class of the LoRaWAN device is defined;
In the field “ Diag. TimeOut ” the timeout in ms for LoRaWAN communication is defined. If the LoRaWAN messages are received for
this timeout, the correspondent bit for the diagnostic of Modbus side is set to 1;
In the field “ RX2 Datarate ” the datarate used into the RX2 window is defined (optional).
In the field “ Mnemonic ” a description of the LoRaWAN device is defined.
Note:
It is recommended to set the “Diag. Timeout” with a higher time than the cyclic delay used by the LoRaWAN device to send data.