Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EtherCAT Master / EtherNet/IP Slave
Document code: MN67E77_ENG Revision 1.000 Page 21 of 28
PLC CONFIGURATION:
The configuration and commissioning of the EtherNet/IP Converter as described on the following pages was accomplished with the help of
the “RSLogix 5000” software of Rockwell Automation. In case of using a control system from another supplier please attend to the
associated documentation.
These are the steps to follow:
1)
Create a "Generic Ethernet Module" under the Ethernet section in the I/O Configuration tree.
