Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EtherCAT Slave / EtherNet/IP Master
Document code: MN67E26_ENG Revision 1.000 Page 11 of 26
ETHERNET:
EtherNet/IP connection and the updating of the converter must be made using Connector9 and/or Connector10 of the HD67E26-A1 with at
least a Category 5E cable. The maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative
to connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the
device to a PC/PLC/other is recommended the use of a cross cable.
