Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
DALI / MQTT
Document code: MN67941_ENG Revision 1.100 Page 33 of 45
SEARCH:
This section is used to scan the DALI network, discover the devices and address them consecutively.
The options available under this menu are different:
Full Device Search: this function will scan and address all the DALI devices;
Partial Device Search: this function will scan and address only the DALI devices without ID;
Full Sensor Search: this function will scan and address all the DALI sensors;
Partial Sensor Search: this function will scan and address only the DALI sensors without ID;
Scan Devices and Sensors: this function will read the data from all available DALI devices/sensors;
Disable Polling: this function will stop the DALI readings;
Enable Polling: this function will start the DALI readings.
TEST DALI 2:
This section is used to monitor the DALI 2 messages received by the converter.
It allows to see the sensor that is communicating, the instance and the information available in the event.
