Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
PROFINET / KNX
Document code: MN67818_ENG Revision 1.000 Pagina 9 di 23
LEDS:
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED
Normal Mode
Boot Mode
1: Device State (green)
Blinks slowly (~1Hz)
ON:
Device powered
OFF:
Device not powered
2: PROFINET communication
(yellow)
Blinks when PROFINET communication is running
Blinks quickly:
Boot state
Blinks very slowly (~0.5Hz):
update in progress
3: KNX communication
(yellow)
Blinks when KNX frame is received
Blinks quickly:
Boot state
Blinks very slowly (~0.5Hz):
update in progress
4: Not used (yellow)
OFF
Blinks quickly:
Boot state
Blinks very slowly (~0.5Hz):
update in progress
5: Ethernet Link (green)
ON:
Ethernet cable connected
OFF:
Ethernet cable disconnected
ON:
Ethernet cable connected
OFF:
Ethernet cable disconnected
6: KNX Programmation (red)
ON:
KNX Programmation activated
OFF:
KNX Programmation not activated
Blinks quickly:
Boot state
Blinks very slowly (~0.5Hz):
update in progress
