Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP Agent
Document code: MN67613_ENG Revision 1.100 Page 20 of 28
SNMP COMMUNICATION
In order to read/write the data from/to PROFINET side, it is necessary to use specific SNMP commands in order to see the SNMP Input and
write the SNMP Output.
Reading PROFINET data from SNMP
:
In order to read the data from the HD67613, it is necessary to use the GET command.
Each OID defined in the section “Set SNMP Access -> SNMP Read” will be placed in the MIB tree of the converter.
In addition, it will be possible to read the entire internal map of the converter in memory blocks of 128 bytes: this feature is helpful in phase
of configuration of the converter.
