ADF Web HD67613-A1, Руководство пользователя

Страница: 14 / 28

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual PROFINET / SNMP Agent
Document code: MN67613_ENG Revision 1.100 Page 14 of 28
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, PROFINET and SNMP.
By Pressing the “
Set Communication ” button from the main window for SW67613 (Fig. 2) the window
“Set Communication” appears (Fig. 3).
The means of the fields for “PROFINET” are:
In the fields “ IP ADDRESS ” the IP address of PROFINET side of the converter is defined;
In the fields “ SUBNET Mask ” the SubNet Mask of PROFINET side of the converter is defined;
In the fields “ GATEWAY ” the default gateway of the network is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net;
In the field “ Port ” the port number used for PROFINET communication is defined (fixed at 34964);
In the field " PROFINET Name of Station " the name of PROFINET side of the converter is defined;
In the fields “ Number Byte IN ” the number of input byte of PROFINET side of the converter is
defined;
In the fields “ Number Byte Out ” the number of output byte of PROFINET side of the converter is
defined.
The means of the fields for the “SNMP” section are:
In the fields “ IP ADDRESS ” the IP address of SNMP side of the converter is defined;
In the fields “ SUBNET Mask ” the SubNet Mask of SNMP side of the converter is defined;
In the fields “ GATEWAY ” the default gateway of the network is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net;
In the field “ SNMP Name of Station ” the name of SNMP side of the converter is defined;
In the field " Contact " the contact for SNMP Agent station is defined;
In the field " Location " the location for SNMP Agent station is defined.
Figure 3: “Set Communication” window