Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / Serial
Document code: MN67601_ENG Revision 1.004 Pagina 18 di 30
SET COMMUNICATION:
This section defines the fundamental communication parameters of two buses, PROFINET and Serial.
By Pressing the “
Set Communication
” button from the main window for SW67601 (Fig. 2), the
window “Set Communication” appears (Fig. 3).
The window is divided in two sections, one for the PROFINET and the other for the Serial.
The meanings of the fields for “PROFINET” are:
In the field “
IP ADDRESS
” the IP address of the converter is defined;
In the fields “
SUBNET
Mask
” the SubNet Mask of the converter is defined;
In the fields “
GATEWAY
” the default gateway of the network is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net;
In the field “
Port
” the port used for PROFINET communication is defined. The port has a fixed
value of 34964;
In the field "
PROFINET Name of Station
" it is possible to assign a name to the PROFINET
node;
In the fields “
Number Byte IN
” the number of input byte of the converter is defined;
In the fields “
Number Byte Out
” the number of output byte of the converter is defined.
The meanings of the fields for the “Serial” section are:
In the field “
Serial
” the serial to use is defined;
In the field “
Baudrate
” the baudrate for the serial line is defined;
In the field “
Parity
” the parity of the serial line is defined.
Note:
In the fields “
Number Byte IN
” and “
Number Byte Out
” insert the number of maximum
bytes that are sent/received plus 2. The value can be a maximum of 500 (498 data bytes + 2 fixed).
Figure 3: “Set Communication” window
