Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
J1939 / SNMP
Document code: MN67162_ENG Revision 1.000 Pagina 24 di 33
SNMP COMMUNICATION
In order to read/write the data from/to J1939 side, it is necessary to use specific SNMP commands in order to see the SNMP Input and write
the SNMP Output.
Reading J1939 data from SNMP
:
In order to read the data from the HD67162-A1/B2, it is necessary to use the GET command.
Each OID defined in the section “Set SNMP Access -> SNMP Read” will be placed in the MIB tree of the converter.
In addition, it will be possible to read the entire internal map of the converter in memory blocks of 128 bytes: this feature is helpful in phase
of configuration of the converter.
