ADF Web HD67021-B2-160, Руководство пользователя

Страница: 16 / 25

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com Phone +39.0438.30.91.31
User Manual M-Bus / RS232 / RS485
Document code: MN67021_ENG Revision 2.100 Page 16 of 25
SET COMMUNICATION:
This section define the fundamental communication parameters of the M-Bus buses.
By Pressing the “
Set Communication ” button from the main window for SW67021 (Fig. 2) the
window “Set Communication” appears (Fig. 3). The window is divided in two sections.
In the section “Hardware Type” it is possible to define the hardware used:
HD67021M / HD67022M;
HD67021M-40/80/160/250 / HD67022M-40/80/160/250;
HD67021-B2 / HD67022-B2.
The means of the fields for “Serial” are:
If the field “ Auto Baudrate ” is enabled, the baud rate on serial side will be detected
automatically;
In the field “ Baudrate ” it is possible to select the baud rate of the M-Bus lines;
In the field “ Parity ” it is possible to select the parity of the lines.
The means of the fields for “M-Bus” are:
In the field “ Baudrate ” it is possible to select the baud rate of the M-Bus lines;
In the field “ Parity ” it is possible to select the parity of the lines.
The means of the fields for the “Ethernet” section are (only for HD67021/22-B2):
In the fields “ IP ADDRESS ” insert the IP address that you want to give to the Converter;
In the fields “ SUBNET Mask ” insert the SubNet Mask;
In the fields “ GATEWAY ” insert the default gateway that you want to use. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the net.
These informations are used for programming the Converter.
Figure 3: “Set Communication” window