![Adexa ZB10 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/adexa/zb10/zb10_instruction-manual_2850888004.webp)
TROUBLE
CAUSE
REMEDY
The power indicator
is light. The
compressor works
abnormally with
noise buzz.
Note: It is normal that the temperature of the compressor surface could be 70
-
℃
90
℃
when it is working.
The voltage is out of
the limitation
Stop the ice maker and restart it
until the voltage is normal.
Water Low
indicator is light.
There is no water or water
level is too low.
Fill water and it will restart to
work automatically.
Ice full indicator
is light.
There is too much ice.
The temperature is too low
Take out some ice.
Put the ice maker to a warmer
place.
There is no indicator
light on the board.
The power is not well-
connected.
Maker the power well-connected.
The indicators of
water shortage and
ice full glitter at the
same time.
The water-box is blocked
by the ice cubes.
The water box can not tilt.
Check relative parts after unplug-
ging.Take out some ice cubes that
block the water box or ice pusher
carefully.
Turn the water box slightly by
hand. 3-5 minutes later try to
restart.
The ice is made
in block.
Ice making time is too long.
Stop the machine and reset the ice
making time. Start the machine after
the ice block has been melted.
Compressor runs,
but no ice is made.
Refrigerant leaks.
There is block in
refrigerating system.
Recharge refrigerant and make
leakage testing. Charge N to check
whether the system is blocked.
Replace the dryer-filter. Check
whether the fan is working.
2
TROUBLE AND SHOOTING
3. Please adjust the feet when placing the ice maker somewhere,
otherwise the water level in water box will be effected and so do the
ice. Before using the ice maker for the first time, you should wait
about 12 hours after positioning it in a proper place.
4. Clean the inner liner,
ice storage basket,
water storage tank,
water box, ice pusher
and evaporator.
5. Power:AC220-240V/50Hz
6. The rated capacity of wire should be over 10A.The wire could be
consisted by single ply or multiplies. The rated current of fuse is 5A.
7. Fill water into water storage tank.
Fill drinkable water only. Make
sure that the water level is not over
the fill max in the cabinet or not over
the bottom of ice storage basket.
8. The plug must be easy to reach when you have installed the ice maker.
2
7