8
1
According to the requirement of the international and domestic market
of household appliance, we designed our Desk-top Automatic Ice
Maker. It is compact and nice in appearance and it is
micro-computerized and it makes ice quickly. The structure of the ice
maker consists of the water storage tank, water pump, water inlet tube,
water box, ice making device, ice tilting device, ice pusher and ice
storage basket, etc. Different from the ice making procedures of the
traditional commercial ice makers,the whole procedures of the desk-top
ice maker, water filling ~ ice making ~ water releasing ~ ice dropping
~ ice transfer and ice storage, are micro-computerized. It is reliable and
convenient for operation. When the situations like water shortage or ice
full occur, the relative indicators on the operation panel will light
accordingly and the ice maker will stop operation. Small ice, normal ice
or big ice, three different sizes of the ice are available for customer's
selection from the operation panel. The ice maker is suitable for the use
of families, bars, hotels and supermarkets, etc.
1
.
The incline angle of the cabinet could
not be over 45
°
during transportation.
Don't make ice maker upside-down
in case the compressor or refrigerating
system troubles occur.
2.The ice maker should be placed on
horizontal and structurally sound ground
and away from heat source and corrosive
gas. At least about 150mm room should
be left around the ice maker to ensure the
fine ventilation and enough spare space
should be left to ensure that you can
control it easily.
≤45
FEATURES
NOTES BEFORE OPERATION
DIAGRAM
Pump
M4
L
E
N
Water Lever Sensor
Wire Connector
Compressor
Solenoid Valve
Tilting
Fan Motor
M3
M1
V1
M2
Main Control Board
Motor for
Switch1
SQ1
Ice-full
Switch2
Sensor
Operation Panel
SQ2
＞150mm
＞150mm
＞500mm
＞150mm
＞500mm
Condenser Temp Sensor
Water Temp Sensor
Terminal
Box
