Adexa NRC-580, Руководство пользователя

Страница: 7 / 11

6.4 Turn the knob anticlockwise to open the main burner valve, press ignitor to ignite burner.
“ ” for complete max flame of the main burner, until “ ” for min flame of main
burner. The flame can be adjusted basing upon the requirements.
6.5 After using, turn the knob clockwise to the “0” position for complete shutdown of the main
burner.
7. Cleaning and Maintenance
7.1 The control panel facial should be cleaned daily.
7.2 If the unit will stay idle for a long time, the stainless steel surface should be rinsed with a
piece of cloth which is dampened with gasoline. Then place it in a well-ventilated area.
7.3 Clean the surface with warm soap water solution, and then clean it with clean water. Wipe
dry with a soft clean cloth. Never use a water jet. This appliance is not water-jet
approved.
7.4 Never use abrasive or acid detergents, brushes or scrapers to clean the stainless steel
surface. Because the ferrous objects could leave rust stains. Never use the chlorine-based
products (such as hydrochloric acid or bleach) to clean the surface, even though these
detergents have been diluted. The cleaning should be done in the same direction as the
satin finish.
7.5 The main burners should be cleaned periodically. (Once a week)
8. Transportation and Storage
The appliance should be placed carefully and it should never be put upside down during the
transportation period. The packed unit should be put in a well-ventilated environment free
from the corrosive atmosphere. If it is temporarily stored, a rain-proof measure should be
taken.
Exploded Diagram & Part List