Adexa NRC-580, Руководство пользователя

Страница: 4 / 11

1
.
Structure and General Performance
1.1 The body of the appliance is made of SS and easy to be cleaned.
1.2 The support is made of casting iron, which is rigid and has a long service life.
1.3 Based upon the requirements and the general conditions of food, the flame can be adjusted
accordingly.
1.4 The appliance is characterized with high thermal efficiency. Also, it is easy to operate and
service.
2. Specifications
NRC-580
Gas
orifice
dia. Gas
pres. Rated heat
input Rated gas
consumption Reduced
heat input Reduced gas
consumption
G31 1.6mm 29mbar 7.8kW 606g/hr 4.9kW 381g/hr
G31 1.6mm 37mbar 9kW 699g/hr 5.7kW 443g/hr
G31 1.6mm 50mbar 10.5kW 816g/hr 6.6kW 513g/hr
G30 1.6mm 29mbar 9kW 710g/hr 5.9kW 465g/hr
G30 1.6mm 37mbar 10.5kW 828g/hr 6.1kW 481g/hr
G30 1.6mm 50mbar 12.2kW 962g/hr 7.4kW 584g/hr
G20 2.6mm 20mbar 10kW 1058l/hr 3.1kW 328l/hr
G25.3 2.6mm 25mbar 9.6kW 1155l/hr 2.4kW 289l/hr
Notice:
Size of the pan:
The biggest pan for open burner is 550mm/ The smallest pan for open burner is 230mm.
3
. Installation
The installation and operations must be carried out by qualified personnel.
3.1 This appliance should be installed in a ventilated room. And an exhausting fan should be
installed to make sure that the steam and the flue products can be exhausted in time.
3.2 After the appliance has been suitably installed, the appliance should be placed horizontally.
It should be prevented from leaning or shaking in use.
3.3 Before installing the piping system, the owner should verify the types of gases, contact with
the local gas supplier and make sure that it is in accordance with the specified gas. The
installation must conform to the local codes.
3.4 The installer should pay attention to not disturb the air combustion admission nor the
combustion products evacuation of appliances fitted with open burners