Important safety advice
● To avoid electric shocks, do not use this device in the vicinity of water.
Do not immerse the mains lead in water or other liquid.
● Please read through the information and safety advice contained in
these operating instructions carefully and thoroughly before you use
the stand mixer for the first time.
● Do not kink or clamp the mains lead. To avoid any risk of stumbling
,
do not allow the mains lead to hang over the edge of a table or a counter.
● Make sure that the voltage shown on the rating plate corresponds with
that of the mains supply. The rating plate can be found on the bottom
of the motor block. The stand mixer is only to be connected to an AC
supply (~). The motor must always be switching off before the stand
mixer is connected with the mains supply. (Switch (7) in the “0” setting).
● Do not use outdoors. Only suitable for use indoors.
● This device should not be set up in close proximity to a naked flame,
easily flammable materials (curtains, textiles, etc. ), a radiator, an oven
or some other heat source.
● Before use, place the device on a horizontal and flat surface.
● Place this device as close as possible to the power source so that you
can disconnect the plug quickly and easily.
● The device must be operated with the type of power specified on the
rating plate. If you are unsure about the details of the available power
supply, ask your dealer or the local power supply company.
● Do not attempt to repair the device yourself, since you will be exposed
to hazardous live components or other hazards by opening and
removing the covers.
● Repairs should only be carried out in a qualified workshop.
● This is not a toy! Keep away from children. The device should be used
and stored out of the reach of children.
● Careful supervision is required when the device is used by or in the
vicinity of children.
● The device should only be used for its intended purpose.
● Never operate empty and without supervision.
● During use, do not touch moving parts with your fingers.
2
