background image

14

 

Cleaning and Maintenance

 

 

 

 

 

 

 

 

 

 

 

GENERAL

 

 

Clean the Gas LAVA ROCK GRILL regularly.  A clean Gas LAVA ROCK GRILL looks better, will last 

longer and will perform better. Carbonised grease on the surface or between the trivets, will hinder 

the transfer of heat from the cooking surface to the food.  This will result in loss of cooking 

efficiency. 

 

 

 

DO NOT use water on the trivets, burners while these items are still hot as warping and cracking may  

occur.  Allow these items to cool down and then remove for cleaning. 

The entire trivets burner can be dismantled for cleaning. 

NOTE:

 

 

 

DO NOT use abrasive detergents, strong solvents or caustic detergents as they could corrode or damage 

the Gas LAVA ROCK GRILL. 

 

In order to prevent the forming of rust on the trivets, and burners, ensure that any detergent or cleaning 

material has been completely removed after each cleaning. 

 

DAILY CLEANING

 

 

1.

 

The drip tray should be checked and emptied frequently to prevent overflow and spillage. 

Remove the drip tray while still warm so that the grease is in a liquid state.  Empty any grease 

from the trays and wash thoroughly in the same manner as any cooking utensil. 

2.

 

Remove the burner, the trivets and thoroughly clean the splash back, interior and exterior 

surfaces of the range with hot water, a detergent solution and a soft scrubbing brush. 

3.

 

Dry the Gas LAVA ROCK GRILL thoroughly with a dry cloth and polish with a soft dry cloth. 

 

 

NOTE

 

 

If the LAVA ROCK GRILL usage is very high, we recommend that the weekly cleaning procedure is 

carried out on a more frequent basis. 

 

Ensure that protective gloves are worn during the cleaning process. 

 

DO NOT use harsh abrasive detergents, strong solvents or caustic detergents as they will damage 

the grate and burners. 

 

Allow these items castings to cool and remove for cleaning. 

 

Parts protected by the manufacturer or his agent are not to be adjusted by the installer, unless the 

installer is an authorized service agent. 

 

Systematic checking and suitable cleaning of the inside of grill before it is lit in order to avoid the 

emission of fire from the oils that have accumulated during previous cooking. In the case of the use 

of a bed of lava stones or any other material generating  dust it is necessary to remember that 

regular cleaning of the burner outlets with a metal brush or any other such utensil recommended 

by the manufacturer, is necessary to avoid obstruction and to allow a good combustion. 

 

There is a bag of lava rock (about 2.5kg) in the appliance. Please put them evenly on bottom grate. 

 

 

Periodic Maintenance

 

 

NOTE:  All maintenance operations should only be carried out by a qualified service person.

 

 

To achieve the best results cleaning must be regular and thorough and all controls and mechanical parts 

should be checked and adjusted periodically by a qualified service person.  If any small faults occur, have 

them attended to promptly.  Don't wait until they cause a complete breakdown.  

 

CAUTION:

 

 

Always turn off the gas supply before cleaning. 

This appliance is not water proof. 

Do not use water jet spray to clean this appliance. 

Содержание ECB-16S
























Отзывы: