E
U
3
Intended use
This appliance is a compressor refrigerator, designed for the short-term storage of food
in the main cabinet and long-term storage of food in the freezer compartment.
This appliance is intended for domestic or similar applications, such as in:
–
shops, offices and other similar working environments,
–
agricultural areas,
–
hotels, motels etc. and similar establishments,
–
bed and breakfast type environments.
This appliance is not intended for commercial use, nor for use in the catering business or
similar wholesale environments.
War
n
ing:
The manufacturer declines all responsibility for injury or damage
caused by failure to comply with the above regulations or deriving from
tampering with even just one part of the appliance and the use of non-
original spare parts.
Installation and connection
Choosing the site
•
Always place the refrigerator in a dry place with satisfactory ventilation. Never expose it to
direct sunlight or install it outdoors. Depending on its climate class (stated on the
nameplate inside the refrigerator compartment), the appliance can be used in different
temperature conditions:
Class
Ambient temperature
SN (Subnormal)
from +10°C to +32°C
N (Normal)
from + 16° C to + 32° C
ST (Subtropical)
from + 16° C to + 38° C
T (Tropical)
from + 16° C to + 43° C
•
Never place the refrigerator close to heat sources. If this is unavoidable, a suitable
insulating panel must be used to allow the appliance to function properly. Otherwise, place
the appliance at least 3 cm from electric or gas cookers and at least 30 cm from
combustion or radiation heating systems.
•
To allow proper cooling of the condenser, the refrigerator must not be placed too close to
the wall. If the refrigerator is installed underneath a wall cupboard, the distance between
the two must be at least 5 cm.
