FR
FR
EN
FIELD TEST DEVICE - LoRaWAN Europe - Guide utilisateur / User guide version V2.0.0
35
Page
of 50
LCD screen
Push button 1
Push button 2
Front view
ON/OFF switch
Charge indicator
Micro USB connector
2.2. Button description
Interface operation
Push button 1
This button allows you to carry out radio transmissions in manual mode.
On the PER menu, a long press reset the counters to zero.
A long press on the push button 1 and 2 simultaneously will lock the button 1, deactivate the accel-
erometer and force the periodical mode.
Push button 2
This button allows you to manage the LCD screen:
• When the LCD back-light is switched off, pressing this button will switch on the back-light.
• When the LCD back-light is switched on, each press will allow you to scroll through the differ-
ent screens available on this device.
A long press on this push button enables to see the Configuration screen.
ON/OFF Switch
The ON/OFF switch allows you to switch the device on or off. Moving the switch to the right will turn
the device on.
Micro-USB connector
The micro-USB connector allows you to charge the device or configure it.
Charge indicator
The charge LED shows you the device’s charge status.
2.3. Sensors description
The product also has two on-board sensors: a temperature sensor and an accelerometer. This one sends a frame when a large vibration is
detected (by shaking the device for example).
Rear view
2. DEVICE DESCRIPTION
2.1. User interface
