Adeunis RF ARF53, Руководство пользователя

Страница: 17 / 25

A
RF53
User Guide
Ref. 08-07-V6-lmn p 15
Processing incoming radio frame: the valid data are extracted from the
incoming radio packet and internally buffered. The buffered data are sent on
the fly to the RS232 module output.
AT Commands
Description
AT commands are interpreted only when the transceiver is in Command
mode. Command : are used to read and update the modem parameters
A command starts with the 2 ASCII ‘AT’ characters. ‘AT’ means ‘Attention’
follow with one or several characters or other data.
Each command is ended with <cr> (carriage return).
In the same command, the time between 2 characters must be less than 10s.
E
ASY
C
HECK
:
When receiving a right command, modem will answer:
‘O’<cr> (ASCII character 0x4F) for accepted command (or OK command)
‘E’<cr> for error
Specific string when specified
Set of commands
Commands Description
Operating mode selection
ATO Return back to transceiver mode.
<silence>+++<silence> Command mode activation. The +++ sequence must be
preceded and followed by a calibrated silence (no other
character)
Registers management
TOP