5420-20/22
1.0
Assembly Instructions (English)
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
ASSEMBLY INSTRUCTION FOR
Willa Arc Lamp
Model# 5420-20/ 22
21 Penn Plaza Suite 909 New York,NY 10001
1. Screw tube (G) into (J) until tight.
2. Insert socket holder (F) into tube(G), then tighten it using 2 *hex screws (H) with allen
wrench(I).
3. Screw tube (B) clockwise onto base (A) until tight , then screw tube (B), (C), (D) and (E)
together .You may need to pull any excess cord gently through the poles so that these two parts
fit.
4. Insert tube (J) to (E), then tighten it using 2*hex screws (H) with allen wrench(I).
Note: The Arc lamp should face forward in the same direction as the switch, and cord
coming out of the back of the base.
5. Place shade (K) onto socket holder (F) and turn the socket ring (L) until tight to secure shade.
GENERAL PRODUCT INFORMATION:
This product is suitable for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce the risk of electric shock (one blade
is larger than the other). This plug will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.Do not
use with an extension cord unless the plug can be fully inserted. DO NOT ALTER THE PLUG .
----------------------------------------------
BULB TYPE: Use only with maximum of 1*100 Watt incandescent bulb (bulb not included).
PARTS DIAGRAM:
(4)* HEX screw (H) (1)* Allen Wrench (I)
(1)* Socket ring(L)
