KP-508AGF
PAGE 10
CARE AND CLEANING
Never clean any of the blender components with scourers,
abrasive pads or chemicals.
The blender components are not dishwasher safe.
Disconnect the blender motor body from mains power before
•
cleaning it.
Motor body
The motor body must never be immersed in water. Wipe it
•
with a damp cloth and dry thoroughly.
Rinsing the jug
After light use the jug may just require rinsing.
Fill the jar with warm water
•
Twist the speed control to the ‘P’ (pulse) position several
•
times.
The water will rinse out the jug.
Leave the jug to dry thoroughly before storage.
•
OPERATION
When your mixture is ready
Set the speed switch to the ‘0’ (Off) position.
•
Lift the jug off the motor body.
•
Remove the lid and pour out the mixture into a container,
•
ready to use or to refrigerate.
NOTE: Cold ingredients may warm up slightly when blended.
Refrigerate them after blending to cool. Hot ingredients such as
soups should be covered and left in a cool place to cool before
refrigeration.
AFTER USE
Immediately after use, follow the instructions in the Care and
•
Cleaning section to clean the blender components.
Storage
When all the components are dry, coil the power cable
•
loosely and store the blender set out of reach of children and
pets.
